XYT YMZ-1 Flock Pile Cleaning Lapping Film For MPO MT Ferrules End Face Cleaning 5 inch round

XYT YMZ-1 Flock Pile Cleaning Lapping Film For MPO MT Ferrules End Face Cleaning

Here is a consolidated and detailed product description for the XYT YMZ-1 non-abrasive flock pile lapping film, specifically optimized for MPO/MT ferrule end-face cleaning, especially effective with cleaning liquid or for dust removal:

XYT YMZ-1 Flock Pile Cleaning Lapping Film – 5” Round

🔹 Product Overview

The XYT YMZ-1 is a non-abrasive, 5-inch round flock pile lapping film specifically engineered for cleaning MPO and MT ferrule end faces. Its microfiber-coated flock surface is ideal for gently lifting fine dust, polishing residues, and oils without scratching or altering the geometry of fiber end faces—making it ideal for precision cleaning in high-density fiber optic applications.

✅ Key Features

We provide customized flock pile cleaning lapping films specifically designed for automatic polishing equipment, according to each customer’s unique specifications and production needs.

🧪 Optimized for Liquid-Assisted Cleaning

• Compatible with isopropyl alcohol (99%), fiber cleaning fluids, or DI water

• Flock fibers hold and distribute cleaning solution uniformly across the contact area

• Leaves no scratches or abrasions on ceramic or epoxy surfaces

🎯 Typical Applications

• Final cleaning before end-face inspection or insertion

• Maintenance of MPO/MTP polishing fixtures and jigs

• Routine cleaning in high-volume fiber optic assembly lines

• Field or lab use for contamination control

🛠️ How to Use – XYT YMZ-1 Non-Abrasive Flock Pile Lapping Film

➤ Recommended Use Stage:

Use the XYT YMZ-1 after the final polishing step of MT/MPO ferrule end-face processing, to remove residual debris, polishing compound, or contamination prior to final inspection.

✅ Wet Cleaning Process with Isopropyl Alcohol (IPA)

🧽 Step-by-Step Instructions:

1. Mount the Film
   Place the 5-inch XYT YMZ-1 flock pile film onto a flat polishing fixture or platen.

2. Apply Cleaning Solution
   Evenly dispense 3–5 mL of IPA onto the flock surface to enable wet cleaning action.

3. Load the MT/MPO Ferrules
   Secure the connectors or ferrule fixture into the polishing jig, ensuring correct alignment.

4. Start the Cleaning Cycle
   Polish the ferrule end faces against the flock film with the following parameters:

   • Pressure: 1000–2000g

   • Speed: 160 RPM

   • Duration: 10–15 seconds

5. Unload and Dry
   Remove the ferrules and blow dry with filtered, oil-free compressed air, or wipe gently with a lint-free wipe if necessary.

6. Final Inspection
   Inspect under a 200–400× microscope to ensure a clean, particle-free surface with no liquid residue or scratching.

⚠️ Important Notes

• Do not exceed pressure or time parameters to avoid fiber tip deformation.

• Use a fresh area of the flock film or replace film regularly to prevent cross-contamination.

• Always ensure film is securely flat and clean before use.

📦 Packaging Options

• Available as individual 5” round discs

• Bulk packs for production environments (optional)

• Custom sizes or shapes on request

🔒 Advantages

• Safe for repeated use on delicate fiber end faces

• Reduces rework and improves first-pass yield

• Compatible with cleanroom workflows

• No risk of abrasive contamination